how to wire electric trailer brakes with breakaway

Electric trailer brakes are a necessary component for safe towing, but wiring them up correctly can be tricky. If you’re planning to pull a trailer behind your vehicle, it’s important to understand the principles of how to wire electric trailer brakes with breakaway. This is a safety feature that will apply the brakes on the trailer if it becomes separated from the towing vehicle.

The first step in wiring electric trailer brakes with breakaway is to make sure the tow vehicle’s brakes are working properly. It’s important to check both the brake pads and the brake lights. Once everything is working properly, you’ll need to connect the brake wires running from the tow vehicle to the trailer. Start by connecting the positive wire to the positive post of the trailer’s brake controller. Connect the negative wire to the post on the controller designated for ground. You’ll also need to run a wire from the controller to the breakaway switch mounted inside the trailer. This is critical for proper functioning of the breakaway system.

Finally, you’ll need to ensure the breakaway switch has power. This is accomplished by connecting the battery of the trailer directly to the breakaway switch. Once everything is wired correctly, test the brakes and breakaway system thoroughly to make sure they’re functioning as intended. If done correctly, you’ll be able to enjoy safe and reliable towing with your electric trailer brakes with breakaway.

Replacing Breakaway Switch On A Trailer With Esco System Etrailer Com