wiring double gang outlet in series

Installing a double gang outlet in series might seem intimidating, especially if you’re a novice DIYer. It’s a slightly more complex process than installing a single outlet, but with a few simple steps you can do it yourself.

It’s important to make sure you understand the basics of wiring before attempting this project. Ensure you have the right tools and materials because safety should be your top priority. Make sure you turn off the power from the mains and inspect the socket for damage or fraying before beginning.

To begin, you’ll need to cut two holes in the wall for the two outlets. Measure twice to avoid cutting in the wrong spot. Next, you’ll need to install the mounting brackets on the wall and feed the wiring through. It’s important that you get the wiring right so that the outlets are wired in series, and not parallel. Connect the ground wire to the frame, ensuring that any metal components are safely grounded. Attach the grounding cups to the mountings and connect the wires to the terminals. Finally, use the screws to secure the outlets into place.

Once everything is in place, inspect the wiring and test the outlet with a light to make sure the power is connected correctly. Double-check to make sure all the wiring is secured and protected, and make sure the walls and surrounding area is free of dust and debris. With these simple steps done correctly, you’ll have successfully installed a double gang outlet in series.

Install Electric Outlet In Backyard Shed Icreatables Com