travel trailer wiring troubleshooting

For those adventurous individuals looking to hit the open road with their recreational vehicles, a whole new set of challenges emerge. Troubleshooting your travel trailer wiring can be a daunting task between the logistics of where to park your RV, finding the correct hitch, and reading the owner’s manual for installation. But, don’t let the technical details discourage you from taking to the highways and byways. Taking the time to make sure everything is in working order is an important part of making sure your journey is smooth and hassle-free.

The first step in troubleshooting your travel trailer wiring involves figuring out what you are dealing with. Are you dealing with a standard four prong plug? If so, the colors typically indicate which wires carry electricity in the 12-volt dc system. The white wire will be hot, the black wire is ground, the green wire is for the right turn signal, and the yellow wire is for the left turn signal. Pay attention to which wire goes where and make sure they are secure.

The second step in troubleshooting your travel trailer wiring entails testing your connections and determining if they are in working order. You can do this by using a basic volt-ohm meter. Take the end of the meter and attach it to the corresponding wire, then turn the power on and off and check the resistance. If everything is working correctly, the voltage should read at least 12 volts. If it reads lower than that, you may have a lose connection or a defective wire.

Having a working travel trailer wiring setup is a necessary measure for having a successful road trip. With a little bit of time and patience, you can easily troubleshoot any problems you may have and create a properly functioning and reliable wiring setup. Don’t let a faulty connection or loose wire keep you from having the adventure of a lifetime. Get out there and explore the wide world of RVing!

Rv Wiring Diagram White Board Jayco Owners Forum