putting connectors on cat 6 cable

When it comes to tackling wiring jobs, putting connectors on Cat 6 cable can be a daunting prospect for the uninitiated. Cat 6 cable is designed for Gigabit Ethernet, and its twisted-pair construction provides superior noise immunity. As such, if you don’t know the right tools and techniques – and get any of the wiring wrong – you won’t get the desired performance out of the connection.

That’s why it pays to do it right the first time and invest in quality tools and connectors. Get this part of the job right, and you can rest assured that your Cat 6 installation will be reliable and up-to-spec. This guide outlines the steps for putting connectors on Cat 6 cable. If you follow these instructions, you’ll have a working Cat 6 network in no time.

First, make sure your cabling is up to spec. The wires should be the same length and suitable for the chosen application. Use a wire stripper or a flat tool to remove the outer sheath. Take care not to damage the inner pairs of copper cables, which should be even in length. Insert the wires into the crimp tool, then use a cable tester to ensure the wiring is correct. Once the wires are properly connected to the connector, crimp them onto the connector. Lastly, attach the cable strain reliefs to hold the cable in the connector.

Follow these steps, and you’ll have no trouble putting connectors on Cat 6 cable. As long as you take the time to do it right, you should be rewarded with top-notch performance from your Cat 6 network.

Sending Power Through A Cat5 Or Cat6 Cable Type Cornick