installing 2 switches 1 light - IOT Wiring Diagram

Installing 2 Switches 1 Light can seem like an intimidating task for the typical homeowner. After all, it requires working with electrical wires, and even if you have a good understanding of basic electricity and wiring principles, it's not something to be taken lightly. Fortunately, with the right knowledge and tools, installing two switches connected to one light is a relatively simple process that can be completed in an afternoon.

To start, you will need to turn off the power to the light. If you don't know where the circuit breaker connected to the light is located, find the main switch in your home and turn it off. Doing this ensures that you won't electric shock yourself while working. Once that's done, it's time to start the installation process.

First, you will need to mount the two switches to the wall. To do this, mark the spots on the wall where you want them to go and carefully drill pilot holes for the wall anchors. Once the anchors are in, use the appropriate sized screws for the switches and carefully secure them in place. Next, you will run the wires from the switches to the light. This is a tricky step, as you'll need to make sure you have the right gauge of wire for the power requirements of the light. Once the wire is in place, connect the wires to the light fixture and the two switches.

With the wiring now complete, you can turn the power back on and test out your switches. If everything is working properly, congratulations—you have just successfully installed two switches to one light! With a little bit of electrical know-how and some patience, you can easily save yourself a trip to the electrician and do this job yourself.

How To Know If I Need A Special Switch For 3 Way Light Quora