how to wire a double light switch uk diagram

For many of us, tackling DIY electrical installations can feel like a daunting task. But with the right information and guidance you can successfully wire your own double light switch in no time! Here’s a step-by-step guide to wiring up a double light switch – with detailed diagrams to help make it easier.

First up, familiarise yourself with the double light switch diagram below. This should provide you with an understanding of how everything is connected. You will see it has two parallel circuits, one supplying power to both switches and the other providing power to the lights. The most important thing to note is that power must always be supplied to the switch before either circuit is activated.

In order to wire the double light switch diagram, start by connecting the mains supply to the switch. Using a screwdriver, unscrew the two screws at the top and bottom, and thread the cable through the holes. Then connect the red/brown conductor to the top terminal, and the blue/black conductor to the bottom terminal. Take a note of the position of the earth conductor from the cables before tightening them up.

Next, screw the neutral wires from the light fixtures to the side terminals of the switch. To finish the job, connect the red/brown and blue/black conductors from the middle of the switch to the remaining terminals of the lights, using the same screws as before.

And there you have it – a fully functioning double light switch diagram! Gently test out each circuit before properly securing all the screws. And soon enough, you’ll be able to enjoy the convenience of controlling both lights with one switch. With a little know-how and guidance, you’ll never feel intimidated by complicated electrical projects again!

How To Install A Smart Light Switch Digital Trends