how to hook up sway bars on trailer

When you’re out on the open road, the last thing that you want is to send your trailer off balance and leave it in a dangerous situation. That’s why it’s essential to equip your trailer with sway bars to keep it in check. Installing these sway bars can be an intimidating job for those who don’t know how, but learning the basics is easy and can save you a lot of worry and hassle on the road.

The first step in the process is to find and acquire the right set of sway bars for your trailer. Since different trailers have different weight distributions, you want to make sure that you get a set that is suited to the job that you need them for. Next, you’ll need to mount the sway bars onto the trailer’s frame. Sway bars are usually mounted using U-bolts and nuts, so make sure that you have the right tools for the job. A torque wrench is recommended to ensure that the fasteners are tight enough to stay in place.

Finally, you will want to attach the bars to the axle of the trailer. Using a hitch pin system is the easiest and most secure way to do this. With the pins attached, you can now adjust the bars to make sure that they are providing the proper amount of resistance for your trailer and preventing it from swaying too much. Finally, use a few pieces of safety wire to make sure that everything stays in place, and you’re ready to hit the road!

Equipping your trailer with sway bars can be a simple and affordable way to protect it on the road. By following the steps outlined above, you can quickly gain the peace of mind knowing that your trailer won’t be at risk of shifting or going off balance when you’re out on the open highway. If you’re in doubt or need help, consult a qualified professional to ensure that the job gets done right.

How The Hensley Hitch Works