how do you install a lutron dimmer switch with 4 wires

Installing a new Lutron dimmer switch is not a difficult task, but it does require some basic knowledge of electrical wiring. In this article, we'll discuss how to install a Lutron dimmer switch with 4 wires.

The first thing you will need to do is turn off the power to the circuit at the breaker box. Once the power is off, you will then need to loosen the screws on the dimmer switch and remove the mounting plate. With the mounting plate removed, you can now see the wiring that is connected to the dimmer switch. You will also need to identify which wires are hot, neutral, ground, and load.

Once these wires are identified, you can begin wiring the new Lutron dimmer switch. You will need to make sure you attach the wires to the terminals correctly in order for the dimmer switch to work. Start by connecting the ground wire to the green terminal of the dimmer switch. The neutral wire should then be connected to the white terminal, and the hot wire should be connected to the black terminal. Lastly, attach the load wire to the red terminal of the dimmer switch.

Once all of the wires have been securely attached, you can go ahead and mount the dimmer switch into the mounting plate. The terminals and wires should stay exposed in order for the dimmer switch to maintain proper function. Finally, switch the power back on from the breaker box and test the dimmer switch. If everything is installed properly, you should be able to successfully adjust the brightness of the lights with the use of the dimmer switch.

Overall, installing a Lutron dimmer switch with four wires is a relatively simple process. As long as you follow the correct procedure and the wiring is done properly, the newly installed dimmer switch should be functioning just fine.

How To Install A Dimmer Switch Wiring Single Pole And 3 Way Lights