7 way rv trailer plug wiring - IOT Wiring Diagram

Tired of dealing with a wonky RV trailer plug and trying to make it work? Is the 7-way RV trailer wiring plug just not quite getting the job done? Well, you can stop uprooting your trailer and stashing all your camping gear away for another day. With some simple tools and a bit of know-how, you can quickly repair your RV trailer’s 7-way plug wiring and be back on the road before you know it.

To begin, you will need a few tools: flat-head screwdriver, Phillips screwdriver, wire cutters, wire strippers, 6-inch or 12-inch conduit bender, 1/4-inch nut driver, and 7-way Trailer Socket Wiring Connector. Once you have these tools ready, you can begin the wiring process. First, disconnect the power from the trailer and disconnect the wiring harness from the tow vehicle. Next, locate the plug on the trailer side and remove the protective cover. You should see the 7-way plug in the back of the wiring connector. Using the flat-head screwdriver, remove the screws holding the connector in place.

Now that you have the 7-way plug disconnected, you can start connecting the wires. Begin by stripping the wires and connecting them to the trailer's 7-way plug in the order recommended by the manufacturer. If you are using the 6-inch conduit bender, bend each wire at the appropriate angle to fit the plug. Ensure you also attach the ground wire to the trailer frame. Lastly, secure the wiring with the 1/4-inch nut driver and reattach the protective cover to the 7-way plug.

Now your 7-way RV trailer wiring plug is repaired and ready to use. All that’s left to do is reconnect the wiring harness to the tow vehicle and the power back to the trailer. After that, you can hit the open road with peace of mind that your RV trailer plug wiring is working properly and you’ll make it to your destination safely.

Wiring Trailer Lights With A 7 Way Plug It S Easier Than You Think Etrailer Com